Zeiss Axioskop 2 plus, Руководство по эксплуатации

Страница: 39 / 138

Axioskop 2
plus START-UP
Axioskop 2 mot plus Initial start-up Carl Zeiss
B 40-075 e 10/03
2-7
2.1.7 Attachment of universal condenser
•
Move stage carrier to the upper stop position
via the focusing drive.
•
Use lever (2-7/ 8 ) to fold out the front lens on
the condenser or, in the case of the motorized
version, swing it out by pressing the respective
key. Unscrew both centering screws (2-7/
3 )
until their ends are no longer visible.
•
In the case of the motorized condenser
(Axioskop 2
mot plus ), plug connecting cable in
the socket on the left front of the stand (2-8/ 1 )
and tighten screwing ring.
•
Move condenser carrier (2-7/ 2 ) to the lowest
position via drive for height adjustment (2-7/ 5 ).
•
Insert condenser (2-7/ 1 ) between condenser
carrier (2-7/ 2 ) and stage carrier (2-7/ 4 ). Orient
the locking screw on the underside of the
condenser in the direction of the groove
(2-7/ 7 ).
•
Press dovetail of the condenser against the
spring mount (2-7/
6 ) of the condenser carrier
until the condenser can be placed horizontally
on the condenser carrier.
•
Let condenser go smoothly, the stud screw will
lock in position at the front of groove (2-7/
7 ).
•
Screw in centering screws until they engage in
the dovetail of the condenser.
☞
Other condensers which can be
used are for example the
achromatic-aplanatic condenser 1.4
H DIC as well as others from the
Axioplan 2 line.
Fig. 2-7 Attachment of universal condenser
Fig. 2-8 Attachment of universal condenser
MOT