Zeiss Axioscope 7, Руководство по эксплуатации, Страница: 82 / 140

START-UP
ZEISS Connecting to power supply and … Axioscope 5/7/Vario
82 430035-7344-001 03/2018
3.3.2 Connecting the HAL 100 halogen
illuminator for transmitted light
NOTE
When using the HAL illuminator, a base
plate for Axioscope (000000-2202-526)
is mandatory.
•
Mount the HAL 100 (
487H
Fig. 3-53/ 4 ) on the
transmitted light connector of the stand (see
also section
488H
3.1.19.1).
•
Connect the 3-pole lamp plug of the HAL 100
to the port for transmitted light
TL
(Fig. 3-54/
3
)
of the separate power supply unit for two
lamps (Fig. 3-53/
2
).
•
Connect the cable for illumination intensity
control (Fig. 3-53/
1
) to the corresponding port
( Remote ) on the back of the stand or to that of
the power supply unit (Fig. 3-54/ 4 ).
•
Switch the toggle switch (Fig. 3-53/ 3 ) for
reflected or transmitted light to the
TL
position
(transmitted light).
3.3.3 Connecting the HAL 100 halogen
illuminator for reflected light
•
Mount the HAL 100 on the reflected light
connector of the stand (see section
492H
3.1.19.1).
•
Connect the 3-pole lamp plug of the HAL 100
to the port for reflected light
RL (Fig. 3-54/ 2 ) of
the separate power supply unit for two lamps.
•
Connect the power cord of the external power
supply unit (
494H
Fig. 3-54/ 5 ) to an electrical outlet.
•
Switch the toggle switch for reflected or
transmitted light to the
RL
position (reflected
light).
Fig. 3-53 Lower stand part for HAL 100
illumination
Fig. 3-54 External power supply unit for two
lamps (front and back)