START-UP
Axiolab 5
Mounting standard components
ZEISS
05/2019
430037-7444-001
63
3.1.9
Mounting the darkfield condenser
NOTE
The condenser holder Z for darkfield is
required to place darkfield condensers
in the condenser carrier.
•
Insert the darkfield condenser (Fig. 3-14/
6
) in
the condenser holder Z (Fig. 3-14/
5
) and screw
on the fastening ring (Fig. 3-14/
7
)
•
Push the condenser holder Z (Fig. 3-14/
5
)
against the spring box (Fig. 3-14/
2
) into the
condenser carrier (Fig. 3-14/
1
).
•
Tighten both centering screws (Fig. 3-14/
3
) on
the condenser carrier (Fig. 3-14/
1
) until they
grip the dovetail ring of the condenser holder Z
(Fig. 3-14/
5
).
Fig. 3-14
Mounting the darkfield condenser
