START-UP
Axiolab 5
Mounting standard components
ZEISS
05/2019
430037-7444-001
51
3
START-UP
The Axiolab 5 microscopes can be independently installed, converted and started up by the customer.
On request, the microscope can also be installed or converted by ZEISS Service for an extra charge.
NOTE
Before installing and starting up the microscope, read the
section 1.1) carefully and thoroughly.
The assembly activities described in the following section are illustrated using examples for one
microscope stand type. However, they apply similarly to other microscope stand models. Special features
are described separately.
3.1
Mounting standard components
3.1.1
Unpacking and setting up
microscope stand
•
Remove all components from the packaging
and check that all components described on the
delivery note are present.
•
Set up the microscope stand (Fig. 3-1/
1
) on a
vibration-free, level, hard and non-combustible
surface.
•
Keep the original packaging for storage or for
returning the instrument to the manufacturer,
or dispose of it properly.
Fig. 3-1
Setting up the microscope
