SET-UP
Carl Zeiss
Installing stand components
Axio Zoom.V16
18
435080-9030-701
05/2012
3.2
Installing stand components
To avoid damage to the motorized focusing drive (e.g. focus motor with profile
column 490 mm Fig. 5
), it should only be set down on the
back
of the column (Fig. 5/
a
) using
sufficiently high supporting blocks (Fig. 5/
c
) (do
not
put it onto the rack side). The focusing unit
b
) of the focusing drive may not be used as a support.
Only lift or carry the focusing drive by holding it at the focusing column with the blue rack
facing upwards! Avoid severe shocks to the focusing drive.
Fig. 5
Setting up the stand
Содержание Axio Zoom.V16
Страница 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Страница 2: ......
