START-UP
Axio Imager
Attaching or changing binocular tube or phototube
Carl Zeiss
M70-2-0020 e 06/2009
430000-7344-001
33
3.2
Attaching or changing binocular
tube or phototube
All binocular tubes listed in the system overview
(refer to Section 2.4) can be attached to the
manual or the motorized stand as described below.
•
Use an SW 3 ball-headed screwdriver to undo
clamping screw (3-2/
4
) and remove the tube
2
) upwards.
•
Place dust cap (3-2/
3
) for tube lens protection
on the dovetail of the binocular tube.
•
Remove dust cap (3-2/
6
) from the desired tube.
•
Insert tube (3-2/
1
) with the dovetail into the
stand opening (3-2/
5
) and align the tube.
•
Tighten clamping screw (3-2/
4
).
CAUTION
Do not hold the tube by the two eyepiece supports when carrying it.
Fig. 3-2
Changing the binocular tube
