Axio Imager 2
FIRST-TIME SET-UP
ZEISS
Attaching or changing binocular tube or phototube
01/2016
430000-7544-001
35
3.3
Attaching or changing binocular
tube or phototube
All binocular tubes listed in the system overview
(refer to Section 2.4) can be attached to the
manual or the motorized stand as described below.
•
Use an AF 3 ball-headed screwdriver to undo
clamping screw (Fig. 10/
4
) and remove the tube
2
) upwards.
•
Place dust cap (Fig. 10/
3
) for tube lens
protection on the dovetail of the binocular
tube.
•
Remove dust cap (Fig. 10/
6
) from the desired
tube.
•
Insert the tube (Fig. 10/
1
) with the dovetail into
the stand opening (Fig. 10/
5
) and align it.
•
Tighten clamping screw (Fig. 10/
4
).
Do not hold the tube by the two
eyepiece supports when carrying it.
Fig. 10
Changing the binocular tube
