OPERATION
Carl Zeiss
Setting up Auto Focus
Auto Focus equipment
24
425131-7044-001
06/2013
Auto Focus settings (Fig. 11):
•
Period
•
Work / Load by AF
•
Focus Wheel
•
Resolution and Speed
•
Surface of Specimen
•
Save
•
Cancel
Period
:
The
Period
function is used to set the Auto Focus period, i.e. the interval between two auto focus cycles.
The time currently set between two auto focus cycles is shown in the
Period
field.
•
To change the period, press the
Period
button.
•
Select or redefine period (Fig. 12).
The period can be selected using pre-defined periods (continuous, 1 s, 2 s, 5, s etc.) or can be redefined
using the numeric pad (entries are made in seconds).
A period of 0 s also constitutes the
Continuous
mode of Auto Focus.
•
Entries are confirmed by pressing
OK
, or cancelled by pressing
Cancel
.
It is also possible to reset the period during the On phase of the Auto Focus (see section 4.4,
page 28).
Fig. 12
TFT display, Microscope / xyz / Auto Focus / Options /
Period
Содержание Auto Focus
Страница 1: ...Operating Manual Auto Focus equipment...
Страница 2: ......
