![background image](http://html1.mh-extra.com/html/zeiss/auto-focus/auto-focus_operating-manual_3310389010.webp)
INTRODUCTION
Carl Zeiss
Warning and information labels
Auto Focus equipment
10
425131-7044-001
06/2013
1.2
Warning and information labels
1.3
Notes on warranty
The manufacturer warrants this device to be free from faults in material and workmanship at the time of
delivery. Any defects occurring must be notified immediately upon detection and maximum efforts must
be undertaken to restrict the damage to a minimum. Upon receiving notice of a defect, the manufacturer
will be under obligation to remedy it at his own discretion, either by repairing the device or delivering a
faultless replacement. No warranty will be accepted in cases of natural wear (in particular wearing parts)
or improper handling.
The manufacturer will refuse any liability for damage resulting from incorrect operation, negligence or
unauthorized intervention in the device, in particular from the removal or replacement of device parts or
use of accessory parts from other manufacturers. Any such case will void the user’s claim for warranty.
Except for activities explicitly described in this operating manual, no maintenance or repairs of any kind
may be performed on the microscopes. Only Zeiss Customer Service personnel or specifically authorized
representatives are allowed to handle repair work.
In the event of a malfunction, contact the Carl Zeiss Microscopy Service in Germany (see page 36) or the
responsible Carl Zeiss service agency.
Fig. 1
Warning and information labels
Содержание Auto Focus
Страница 1: ...Operating Manual Auto Focus equipment...
Страница 2: ......