4. Premendo il tasto
Invio
si esce dall'impostazione; le ultime impostazioni visualizzate
diventano i nuovi valori predefiniti.
Prima schermata di impostazione del sistema (Modello 5010 e 5015)
Nota: nel modello 5000 non sono presenti le opzioni Keratometria,
Arrotond. (K) e Letture PK.
Italiano
Arrotondam.
Selezionare 0,12 o 0,25 per arrotondare i risultati della rifrazione. Il valore predefinito
è
0,25
diottrie.
Vertice
Selezionare un’impostazione del vertice di 0 - 10,5 - 12,0 - 13,5 - 15,0 o 16,5 mm.
Il valore predefinito è
13,5
.
Lingua
Le lingue disponibili sono: inglese, danese, olandese, francese, tedesco, italiano,
norvegese, portoghese, spagnolo e svedese.
Monitor
La posizione del monitor sullo schermo di rifrazione può passare da destra a sinistra a
seconda dell’occhio sottoposto a rifrazione (
Alternato
) oppure, se l'operatore lo
preferisce, può rimanere fisso sul lato sinistro (
Stazionario
).
Una terza posizione del monitor (
Schermo intero
) permette di ottenere un'immagine più
grande dell'occhio da visualizzare nel momento di rilevamento della mira per la
rifrazione. Il valore predefinito è
Schermo intero
.
Luminosità
Regolare la luminosità dello schermo dal valore minimo (1) a quello massimo (5).
Il valore predefinito è
5
.
Keratometria
Selezionare mm o dK. Il valore predefinito è dK.Modello 5010 e 5015
Arrotond. (K)
Per arrotondare i risultati della Keratometria, selezionare 0,12 o 0,25.
Il valore predefinito è
0,25
diottrie.
(Modello 5010 e 5015)
Letture PK
Selezionare per misurare i punti periferici a destra (
Destr
) e a sinistra (
Sinistr
), oppure i
punti a destra, sinistra, superiori e inferiori (
Tutto
).
Il valore predefinito è
Tutto
(Modello 5010 e 5015).
Zeiss Humphrey Systems Acuitus Manuale d’uso
PN 50648 Rev A June 2001
4