Zeiss 304970-9100-000, Инструкция по эксплуатации

Страница: 58 / 82

What to do in the event of malfunctions 14-Function Foot Control Panel, Wired or Wireless
Version 6.1
Page 58 G-30-1706-en
What to do ifthe wireless foot control panel fails
If the suspension system or the surgical microscope does not respond to the
actuation of a switch on the foot control panel, take the following steps first:
• Insert the 6-pin connector (1) of the connecting cable (if provided) in
socket (3) on the foot control panel.
• Insert the 4-pin connector (2) (straight or angled) of the connecting cable
(if provided) in socket (4) on the stand, optionally on the FCP upgrade kit.

The foot control panel is now operating in wired mode.
• Look for and eliminate the cause of the malfunction after use, also see
page 60 ff.
NOTE! Connection cable
ZEISS recommends keeping the connection cable for the FCP WL at hand.