General
ZMP 5010 Instruction manual
version 2.6
page 4
last update: 18.06.2015
Never leave the ZMP 5010 under direct sun exposure. Always store the
ZMP 5010 in it’s carrying case.
Zehntner GmbH Testing Instruments refuses all warranty and liability
claims for damages caused by usage of the ZMP 5010 in combination with
non-original accessories, or accessories from 3
rd
party suppliers.
Unauthorized modifications and changes of the ZMP 5010 are not permitted.
Reproduction without permission is not allowed.
For the operation of the ZMP 5010 apply all local safety regulations.
3.
Delivery of device
3.1
Damages during carriage
At the receipt of the goods, check for any visible damages at the outer packaging. If
the packing is unharmed you can sign the receipt of the documents. If you do
suspect by your visual impression that damage has occurred, make a note of the
visible damage on the delivery receipt or freight papers and get the carrier to
countersign it. Moreover, the forwarding agent / courier service must be held
responsible for the damage in writing.
If a hidden damage is discovered while unpacking, you have to inform and hold the
forwarding agent / courier service immediately liable in the following way: “When
opening the parcel we had to notice that …. etc. etc.“ This superficial checking of the
goods has to be done within the time limit set by the forwarding agent / courier
service, which is normally within 7 days. However, the period could be less. Hence,
it is recommended to check the exact time limit when receiving the goods.
If there are any damages also immediately inform your authorized Zehntner agent or
Zehntner GmbH Testing Instruments directly.
In case the device needs to be transported again at a later time, it has to be
packaged properly. If the device was supplied in a carrying case or storage box, this
original packaging needs to be used also for later shipments.