Instruction
ZAA 2300 transport arrangements
version 1.0
page 2
last update: 10.10.2007
Mount the left side frame on the ZAA 2300 as shown below. Usually, the screws have
to be inserted in the top cut out diameters, tighten them using the allen key.
(The bottoms cut out diameter are prepared for applications using wire or profiled
applicators at substrates with film thickness as from 5 mm.)
Afterwards put the weight into the weight slide at the left side
frame and fix it with the knurled screw.
Place the right side frame to the ZAA 2300 so that the weight will fit into the weight
slide, fix it with the knurled screw and afterwards fix the right side frame in the same
way as the left side frame.
For remounting proceed in reversed order.
left
