8
Installation
Plumbing
■
■
The Rittling Fanvector is supplied with either opposite end, same end
or recessed floor connections.
Opposite end connections have brass headers with a 3/4" FPT
connection. The headers have a 1/4" FPT hole that can be
plugged or fitted with a vent (by others).
Same end connections are supplied with 1/2" straight copper
tubing. Standard 1/2" female copper fittings (sweat) can be used
for connection purposes (by others).
Recessed floor connections are 3/4" straight copper. Standard
1/2" female copper fittings (sweat) can be used for connection
purposes (by others).
■
■
Plumbing access openings are cut into the unit cabinet. Openings
can be used as necessary and determined by field plumbing.
■
■
Connect inlet and outlet plumbing per building specifications.
■
■
All connections should be leak tested prior to electrical connection
and operation.
Electrical
■
■
Remove electrical box connection cover to expose unit wiring.
■
■
Connect power and thermostat (if used) to unit per the wiring
diagram on page 9.
■
■
Replace electrical box connection cover.
If applicable, front panel and end panels should be re-installed at this
time if they were removed for installation purposes.
