- 32 -
12. Easy plug-and-play data transfer without PC
Below you can find another easy method to upgrade operating software by
easy plug-and-play data transfer from one receiver to the other.
1.
Notice that both receivers, master and slave, are powered off .
2.
Connect one receiver to another receiver
by using RS 232 cable.
3.
Switch your master receiver to stand-by mode.
4.
Turn on the slave receiver by Power ON/OFF and check the front
display is "d.000". From now on the slave receiver will be upgraded.
5.
During the download the receiver front display will show the progress
of the procedure, e.g. "d.062" means 62% data transfer finished.
6.
After completed
d
ownload, the receiver
automatically writes
downloaded data in its Flash Rom. Please wait until
it displays
“good”
message on the Front Panel Display.
Receiver has to be re-booted
by power off/on if the procedure is completed.
