Zehnder Rittling ComfoControl Luxe, Руководство пользователя

Страница: 34 / 76

EN 12
5. Maintenance
The CC Luxe does not require main-
tenance. However, the ventilation
unit controlled by the CC Luxe does
require periodic maintenance. The
maintenance required by the ventila-
tion unit is stipulated in the ventila-
tion unit's user manual. A copy of this
manual is available from the supplier
of your ventilation unit.
Demounting
If you need to demount the CC Luxe,
for instance for painting purposes,
then follow the steps below:
1. Disconnect the ventilation unit
from its power supply.
2. Loosen the bottom of the CC
Luxe with a screw.
3. Slide the CC Luxe off its bracket
(up).
4. Mark the location of the connec-
tors.
5. Remove the marked connectors
and protect them against dirt.
2
3
Assembly
To remount the CC Luxe front section,
follow the steps below:
5. Fit the marked connectors in the
correct locations.
6. Slide the CC Luxe onto the
mounting bracket.
7. Fasten the bottom of the CC
Luxe with a screw.
8. Reconnect the power to the ven-
tilation unit.
6. Malfunctions
Certain system information can be
displayed on the CC Luxe:
- Error messages.
- Warning to clean or replace the
filters.
- Information on the status of your
ventilation and/or cooling sys-
tem.
In the event of a malfunction, the CC
Luxe will display the corresponding
code.
The CC Luxe display will show an 'A'
or an 'E', followed by a number.
Wednesday
Check: Error E2
Settings
GHE
Cooker hood
1
In the event of a malfunction, reset as
follows:
1.
Press “ ” to go to “
system
status
”.
2. Press “ ” to delete the
error message, for example “ER-
ROR E2”.
System status
Error E2
System status
Reset
2
Multiple malfunctions will be dis-
played as a list.
Multiple malfunctions will be dis-
played in the “SYSTEM STATUS”
screen. Only “ERROR E2” is cur-
rently displayed.