EN - 4
2 ComfoClime unit internal access
2.1 Access to the LEFT front coil
Always comply with the safety regulations, warnings, comments and instructions
given in this document. Failure to comply with the safety regulations, instructions,
warnings and comments may lead to personal injury or damage to the unit.
Before starting any operation, disconnect the main plug from the power supply and
make sure that the unit is voltage free.
In order to proceed with access to the LEFT front coil, follow the steps as described below:
Step
Action
1
Remove the ComfoClime black
top cover
A
by pulling the cover
and unfastening the 4 hooks.
During this operation be careful
not to damage the electronic
board placed behind the cover.
A
2
Unscrew the two screws on the
top and the two on the bottom of
the front of the unit and remove
the white frontal panel
B
of the
ComfoClime, lifting it a little then
extracting the lower side.
B
3
Remove the front metal sheet
C
by unscrewing all the screws
D
.
D
C
