ZeeVee ZyPerMX4, Руководство пользователя

Страница: 27 / 38

23
Basic Operation
Recovering a Lost Password
The ZyPerMX4 does not provide any built-in safeguards for lost or forgotten passwords.
The ZyPerMX4 must be reset to factory-default settings using the NAV / Control button on
the front panel. Use the admin password to login and then change the password under the
Device tab.
1. Locate the NAV / Control button on the front of the unit. This is both a button and
wheel.
2. Disconnect power from the ZyPerMX4. Press and hold the NAV / Control button
while applying power. Release once the LED screen presents options. Rotate dial
to the Right to reset ZyPerMX4 to factory defaults. Rotate dial to the left to revert the
ZyPerMX4 to previously installed version of firmware.
3. The unit will reboot and after about 60 seconds, the unit will be ready for use.
4. Follow the steps under Setting the Password (page 22) to complete the process.
Note: All IP streaming customization settings will be lost as a result of a factory reset.