Regency Owner’s Manual
Page 15
4.0.3.5 Vacation Timer
The next available setting will be the Vacation Timer.
The Vacation timer is used for a period during which the system will be dormant, it will execute
the filtration cycles but not temperature sampling, except if the temperature drops below 40°F. .
However, similar to the Silence Timer the user could still have full control of the system if it
needs to use the Spa by simply depressing any of the key, after using the spa it will return to the
vacation mode if required.
While the screen bellow is being displayed:
The modes are: OFF or ON (ACTIVE). The mode is selected by depressing the Programming Key
and then either the Up or Down key to set the desired mode.
If the mode ON is selected the system will display:
A depression of the Programming mode will set MONTH, a second depression the DATE
and finally the YEAR, next depression will command the controller to display:
While the above screen is displayed, follow the same previously described process to set
the end of vacation date.
Vacation Timer
<Mode>
Start Vacation date
<Current Starting date>
End Vacation date
<Current ending date>
