zebris Medical GmbH
PDM/PDM mobile Technical Data and Operating Instructions
Page 23/42
4.3
LED Video Lights (SYNCLight / SYNCLight plus)
In order to produce well lighted and tack sharp video captures it is essential to maintain
perfect lighting conditions at the patient’s side. Only with adequate lighting conditions
video cameras can work with shutters times short enough to freeze fast movements and
capture sharp images.
The LED video lights
SYNCLight
and
SYNCLight plus
are accessories of the PDM sys-
tem and perfectly adapted for use in combination with zebris
SYNCCam
as well as the
force distribution measurement. Their brightness can be adjusted infinitely.
The integrated synchronization unit automatically switches the lights on at the start of a
measurement and turns them off again after stopping it.
Both SYNCLights are equipped with ¼ inch tripod threads and can be adapted to zebris
tripods as well as commercially available camera tripods
NOTE
In order ensure save operation of the SYNCLights it is mandatory to
keep the black heat sinks at their back side uncovered and well air
circulated all the time.
¼ Inch Tripod Thread
Type Plate
Power LEDs
Bottom Connector Board
Top Connector Board
LED Heat Sink
