6
MPM-100
Getting Started
To start using the MPM-100, install one or two Security Access Module (SAM) cards (if required), install
the battery and then charge the MPM-100.
Installing SAM Cards
To install a SAM card:
1.
Place the MPM face-down on a flat surface.
2.
Lift the manufacturing label.
3.
Slide a SAM card holder to the right to unlock and then lift.
4.
Insert the SAM card into the holder in the orientation shown above.
5.
Close the SAM card holder.
6.
Slide the SAM card holder to the left to lock.
7.
Repeat for the second SAM card, if required.
8.
Place the label over the SAM card holders.
NOTE
An SAM card is not required for all applications. If using one SAM card, place the card in
either holder.
QRG.fm Page 6 Friday, October 14, 2011 3:24 PM
PRELIMINARY