• Mode 4
This mode enables button presses to be used to increment a
secondary manual measurement following the jaw measurement. It
can be used in 2 ways;
1) If no additional secondary measurement is required, simply press
button A.
2) If a secondary measurement is required, button B is pressed (jaw
measurement is logged) and then subsequent button B presses
increment the secondary measurement. Pressing A then logs both
measurements.
Example: The length of mussels are being measured by pressing
button B, which saves the measurement. The visual quality of the
mussels are being rated on a scale of 1 to 3. Pressing button B
again will increment the value required. Pressing button A will then
log the initial length measurement and the number chosen to
represent visual quality. Note that the manually chosen value is
arbitary. It could represent a measurement such as an estimation of
Abalone hump size or a general value such as in the above
example.
6
