Start of Configuration
•
The reading of the "RESET " label turns all the
parameters back to default values.
•
When you intend to turn your scanner back to
default parameter, please scan the "Start of
configuration" label first, then scan "RESET"
label and finally scan the "End of configuration"
label.
RESET
•
The reading of the "ABORT" label discards all
the parameters read prior to the "End of
configuration".
ABORT
•
The lable below must be read to enter into
serial interface for ZB- 800R or ZB- 800C when
the wand is configured the first time.
RS-232C
•
The lable below must be read to enter into
serial interface for ZB- 800K when the wand is
configured the first time.
PC/ AT
6
HEADER AND TRAILER
Header
Set
Trailer
INTER-MESSAGE DELAY
None
500 mSec
100 mSec
1 Second
INTER-CHARACTER DELAY
None
20 mSec
10 mSec
50 mSec
End of Configuration
7
