Start of Configuration
•
The reading of the "RESET " label turns all the
parameters back to default values.
•
When you intend to turn your scanner back to
default parameter, please scan the "Start of
configuration" label first, then scan "RESET"
label and finally scan the "End of
configuration" label.
RESET
•
The reading of the "ABORT" label discards all
the parameters read prior to the "End of
configuration".
•
The scanner remains in the last interface
mode when the scanner is reset. The lable
below should be scanned if th escanner is
configured the first time.
ABORT
RS-232C
PC/ AT
WAND EMULATION
SHOW VERSION
6
SCANNING MODE SELECTION
Auto Scan Mode
Testing Mode
Alternate Mode
Repeat Mode
Trigger Mode
DATA REDUNDANT CHECK
Enable
Disable
HEADER AND TRAILER
Header
Trailer
Set
End of Configuration
7
