System Settings
Barcode Value
Description
Return scanner to factory
defaults .
Return cradle host to factory
defaults
Return to USB default
(Communication cradle link
required)
Return to RS232 default
(Communication cradle link
required)
Return as USB-virtual COM port
default
Display firmware version
Scan Modes
Trigger mode
The scanner becomes inactive as soon as
the data is transmitted. It must be
triggered to become active again.
Auto scan mode
The scanner is still active after the data is
transmitted but the successive
transmission of the same barcode is not
allowed when the trigger switch is
pressed again.
Presentation mode
Also called auto trigger mode. The
scanner is inactive but will automatically
detect barcodes presented in the scan
zone and become active.
USB Online Mode
USB online mode
The scanner connects directly to a USB
host to recharge and transmit data.
Beeper Settings
Good Read Beeper Tone Selection
Medium beeper tone
High beeper tone
Low beeper tone
Speaker disable
Radio Communication
BT HID mode
BT HID mode (Combo
keyboard)
For Apple mode
(Enter PIN CODE then scan SET)
Multi Media Keyboard ( For
Apple Mode)
Software Keyboard
ON/OFF( For Apple Mode)
SET
