OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
Introduction
This chapter covers some tips about scanning.
Scanning with the Z-3070
1. Ensure all connections are secure and power is on, the LED is
indicating in RED as standby position, and the symbol you want to
scan is within the scanning range.
2. Aim the scanner at the barcode. If your scanner works in trigger mode,
aim and press the trigger.
3.
Ensure the scan line crosses every bar and space of the symbol.
4.
Upon successful decode, the scanner beeps and the LED indicates
GREEN
.
Aiming
Do not hold the scanner directly over the barcode. Scanning light
reflecting directly back into the scanner from the barcode is known as
specular reflection which can make decoding difficult. The area where
specular reflection occurs is known as a “dead zone”.
You can tilt the scanner up to 65° forward or backward and achieve a
successful decode. Simply practice quickly to find what tolerances to
work within.
ZEBEX INDUSTRIES INC.
All Rights Reserved.
10
