Zebex Z-2242, Быстрый старт

Страница: 9 / 21

Started Z-2242 / Z-2240
Power On Z-2242 / Z-2240
Press and release the power button
LED blinks in red indicating low and risk battery and stating red indicating that
the battery is charging. The LED becomes green when battery is fully charged,
then.
Note :
Device turns to the modes as below by pressing power button key.
Suspend Mode
Press and release the power button to place the Z-2242 / Z-2240 in suspend mode. In suspend
mode the device turns off the display and goes into a low power state to conserve battery power.
Power Off
To Power off the Z-2242 / Z-2240, press and hold the button until the device option dialog box
appears, choose “ Power off ”. When the Power off dialog box appears, tap “ OK”.
Reset
Reset the Z-2242 / Z-2240 if application stop responding. Press and hold the power button until
the device options dialog box appears then touch Reset.
Hardware Reset
If the Z-2242 / Z-2240 stop responding, perform a hardware reset by long press power button.