Zebex Z-1060, Руководство пользователя

Страница: 23 / 28

19
Barcode Setup
Use this parameter to assign which types of barcodes
the PDC will read, and which not.
1. From the Setup Menu (page 15), press
^
or
v
till
Barcode Setup is selected, then press the
s
key.
The screen shows a page for (example) EAN/UPC
with the designation On or Off below the code type.
On means that the PDC will read this type of code.
2. Change the setting if needed with the trusty
v
and
^
keys, then press
s
to actually make the setting
and proceed to the next code type page.
3. To flip through the pages rapidly, just press
s
repeatedly.
A typical list of code type pages might be:
EAN/UPC, Code 39, Codabar, ITF 25, Code 128,
Code 93
4. When finished, press
f
to exit. The PDC remem-
bers your settings, and will use them each time the
PDC is turned on until they are modified.
Note: FREETASK includes the ability to read the most
popular types of barcodes. To set up the PDC for
reading barcodes beyond this limited list, use the
PC setup program, WinTaskGen, to adjust set-
tings.