5
Installation on double pan & tilt>>
1. Loosen the locking screw.
2. Unfold the Supporting leg and adjust it to the desired position
3. Install Easylock’s QR plate on the QR plate which belongs to the heads (e.g ball
heads/tilt heads/video heads, etc), then tighten the positioning screw into the slot of the
QR plate which belongs to the heads (e.g ball heads/tilt heads/video heads, etc) from the
top side. Put this assembled module into heads (e.g ball heads/tilt heads/video heads,
etc).
4. Clamp Micro 2 and Easylock with the positioning bean, lock the screw at the bottom of
Easylock. Lock the positioning screw at the bottom of Micro 2 with the quick spanner. To
avoid shaking, please confirm there are at least two screws between Slider and Easylock.
5. Attach the heads (e.g ball heads/tilt heads/video heads, etc) on Micro 2.
6. Attach the camera on the heads (e.g ball heads/tilt heads/video heads, etc).
