Zeal-All ZA-B85P6G, Руководство пользователя, Страница: 9 / 11

7
Chapter 5 Install CUP
Please note the following information before installing the CPU:
Make sure that the CPU used is on this board's scope of support.
Before installing the CPU, be sure to turn off the power to avoid damage.
Please confirm the first pin position of CPU, if the direction is wrong, CPU will not be able to
put the CPU slot
(
Or confirm the position on both sides of the CPU 2-1 / 2-2.
)
Please apply the heat paste on the surface of the CPU.
Do not start the computer until the CPU cooling fan is installed. Otherwise, overheating will
cause damage to the CPU.
Please set the frequency according to your CPU specifications. We do not recommend that
you set the system speed beyond the standard range of hardware, because these settings are not
standard for peripheral equipment. , Please evaluate your hardware specifications, such as: CPU,
graphics card, memory, hard disk, etc. .
4
-
1 Install CPU
Make sure the CPU slot position on the motherboard is 2-1 / 2-2
.
2-1
2-1
2-2
2-2
Slot
Cutaway slots on a first pin position
CPU triangle mark as the first pin position
Do not remove the protective cover before installing the CPU. This protective cover will
automatically fall off when the CPU is installed and the lever is retracted.