Zeagle Envoy RaZor, Руководство пользователя

Страница: 8 / 20

CAUTION
WARNING
NITROX USE
Zeagle regulators are manufactured using materials suitable for
use with oxygen enriched gases (i.e., Nitrox, etc.) providing the
oxygen content does not exceed 40%. The regulator must be kept
“Oxygen Clean” and used only with certified clean air mixtures to
maintain this status. Once the regulator is used with air not certi-
fied to be clean for enriched air use, the regulator will have to be
cleaned again for enriched air use by a certified technician.
8
Extreme cold water diving such as diving under ice requires spe-
cialized training and procedures. Do not attempt these activities
unless you are fully qualified and properly equipped to do so
safely.
1 . The high-pressure outlets (HP Ports) are distinctly larger than
the low-pressure outlets. Only devices with fittings, hoses and
components designed for the full tank pressure that the regula-
tor will be mounted on, such as Submersible Pressure Gauges,
are to be installed in these ports.
2 . During installation, the O-ring hose fittings will seal with
hand-tight pressure, but may come loose during use if not tight-
ened carefully with a small wrench. Proper torque for the hose
fittings is 40-45 in lbs. (4.5-5 N-m) Excessive tightening will not
help the seal and may damage the parts (see DEMA Guidelines
No. 101, Low Pressure Hose Installation Caution Statement;
ANSI American National Standard for Underwater Safety, para-
graph 9.3.1).