ZDW H10, Руководство пользователя, Страница: 4 / 8

Accessories included
1pcs H10 Bluetooth Speakers
1pcs USB charging cable
1pcs Audio Line
1pcs specification manual
Charge Integrated Battery
This bluetooth speaker is powered by an intergrated rechargeable lithium battery.
Charge the battery as follows:
1.
Insert the charging cable into the DC 5V socket on the unit. Connect the USB plug
into a PC or AC/DC adapter. The LED indicator turns red and the battery is being
charged.
2.
When the battery is fully charged, the red LED indicator goes out.
Pairing H10 to mobile phone or other device
Active the bluetooth speaker’s pairing mode. Place unit in power off mode, press and
hold the on/off button for about 3 seconds unit the red and blue LED is flashing
rapidly.Boot in pairing connection - Open speakers, if the speaker didn’t connected to
any mobile phone or other bluetooth devices before, the speaker will reach the
waited match automatic; If the speaker was connected with other bluetooth devices
before, after start up, it will connect the active connection last time.
Tips:
Please make sure the speaker is in power off mode when trying to activate the
pairing mode.
1.
Turn on your mobile phone and activate the bluetooth functions.
2. Search for bluetooth devices. H10 will show up.
3. Pair your device with H10. If password is needed, type in “0000”, after H10 is
paired with your device, it then connected to your device.
Bluetooth Function:
On/Off: To switch for the unit on or off. Press 3s to turn on and press 3s to turn
off the H10 speaker.
Phone: To pick up or hang up a phone call.