26 / 64
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 2.1 “User Manual for 3K-6KTLM LITE
Figure 19 – Connecting the DC input power cables (1)
Note:
L2 is approximately 2 or 3 mm longer than L1.
3)
Insert the positive and negative power cables in the corresponding cable glands.
4)
Insert the stripped positive and negative power cables into the positive and negative metal terminals
respectively, and crimp them using a suitable tool. Make sure that the cables are secured so that they
cannot be pulled out with a force of less than 400 N, as shown in Figure 20.
Figure 20 – Connecting the DC input power cables (2)
5)
Insert the crimped power cables into the corresponding seats until you hear a “click” sound. At that
point, the power cables will be snapped into place.
6)
Replace the cable glands on the positive and negative connectors and rotate them against the
insulation covers.
7)
Insert the positive and negative connectors into the corresponding DC input terminals of the inverter
until you hear a “click” sound, as shown in the figure.
