ZComax ZAC-1023-2 страница 3 Скачать руководство пользователя

Страница: 3 / 66

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Verify that the ambient temperature remains between 0 to 40° C, taking into account the elevated

temperatures when installed in a rack or enclosed space.

Verify the integrity of the electrical ground before installing the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This transmitter is restricted to indoor use only within the 5.15-5.25GHz and

5.470-5.725GHz bands.

Содержание ZAC-1023-2



































































Результаты поиска

Содержание ZAC-1023-2

Отзывы:

Похожие инструкции для ZAC-1023-2

Бренды по названию

Популярные бренды

ZComax ZAC-1023-2, Руководство пользователя

Результаты поиска

Содержание ZAC-1023-2

Отзывы:

Похожие инструкции для ZAC-1023-2

Бренды по названию

Популярные бренды