background image

zBoost

®

 TRIO ZB575 Manual

zBoost

®

 TRIO ZB575 Manual

8

9

FOURTH: Connect the zBoost Base Unit to Power

Connect the zBoost Base Unit to the provided power supply and plug into a power outlet. 

Upon initial power up, the LED will cycle RED, GREEN and ORANGE for 30 seconds.  After 30 
seconds, a series of GREEN 

fl

 ashes will indicate the quality of your setup. Following this, a solid 

GREEN light indicates normal conditions. If it is not solid GREEN, follow the instructions in the 
Base Unit LED Indicators section. Adjustments may be needed to optimize performance. If you 

fi

 nd 

the increased signal coverage is acceptable, however, no additional adjustments are needed. See 
“zBoost Base Unit Light Indicators” on page 10) for more information.

Con

fi

 rm That Your zBoost is Working Properly

When your zBoost system is in place and fully connected, walk throughout your home and verify 
that you can place calls and have fast, reliable data speeds. If the signal strength has improved, 
your zBoost is working. Remember, coverage varies based on outdoor signal level, home 
construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and 
building materials. 

 

 Note

Cell phone signal bars are approximate and vary from 
phone to phone. The number of bars can 

fl

 uctuate 

widely, depending on the location of the phone, the 
position or angle of the phone, weather, etc. Most cell 
phone signal meters update every 6 to 10 seconds. An 
increase of only one bar typically indicates a 4x to 10x 
signal increase.

Improving Your Coverage Area

Should you desire to improve coverage, you may:

• 

Relocate the External Antenna in order to capture a better signal –higher is usually better.

• 

Increase the distance between the Indoor Antenna and the External Antenna.

• 

Purchase an upgrade antenna available at www.zBoost.com

NOTE: 

The zBoost ZB575 requires at least 15 feet of vertical separation between the Base Unit 

and the External Antenna. Generally, increasing this distance (up to 40 feet) will increase the 
performance and decreasing the distance will limit zBoost performance. 

Keep the Base Unit off the 

fl

 oor and at least 2 feet away from other cords, metal objects or other 

wireless devices such as wireless routers or wireless access points. The zBoost TRIO performs 
best when there are no obstructions between the zBoost Base Unit and your mobile device.

zBoost Base Unit

Power Supply

Indoor Antenna

Coaxial Cable

External Antenna

zBoost

Indoor Antenna

Pole Bracket

Saddle

U-Bolt

15 ft. of vertical

separation

Содержание Trio ZB575A












Отзывы: