ZBA BC04-191, Руководство пользователя

Страница: 19 / 25

ZBA,
Inc.
Command Response Parameter
AT+SCANTIME=<Para1>,<Para2>,
<Para3>,<Para4> OK Para1= Scan interval
time
Para2=Scan time-out
Para3=Inquiry interv
8.2.11 Clear Pa
Command Response Parameter
AT+CLEARADDR OK None
Note: This command will clear any remote device address that the module has been paired
to.
8.2.12 Set Sniff Power Saving Mode
Command Response Parameter
AT+SNIFF=<Para1>,<Para2>,
<Para3>,<Para4> OK
AT+SNIFF? OK
+SNIFF<Para1>,<Para2>,
<Para3>,<Para4>
Para1 Maximum
Para2 Minimum
Para3 test
Para4 Over time
Default = 1024.512,1024,512 number in decimal mode
8.2.13 Set Sniff Power Saving Mode—Extended
Command Response Parameter
AT+SNIFFEX=<Para1>,<Para2>,
<Para3>,<Para4> OK
AT+SNIFFEX? OK
SNIFF<Para1>,<Para2>,
<Para3>,<Para4>
Para1 Maximum
Para2 Minimum
Para3 test
Para4 Over time
Para5 Sniff timeout
Default = 1024.512,1024,512,10 number in decimal mode
8.2.14 Reset to Factory Default
Command Response Parameter
AT+RESET OK None
8.2.15 Set/Inquire Scan Time
a