Zaxcom ZMT3-FLEX, Руководство пользователя

Страница: 20 / 30

Zaxcom ZMT3 Flex Setup Menu
20
Encryption Code Set
If an encryption code is set the transmitted audio will be encrypted and can only be listened to if the
receiver has the matching encryption code entered. When receiving an audio signal and the codes do not
match, all that will be heard is white-noise or silence. So if using encryption it is important to make sure
the matching receiver has the same code.
These two sets of numbers are formed into a single six-digit encryption code which provides a total of
16,777,216 possible combinations.
Please note that both of these codes should be set to 000 for normal un-encrypted operations
Adjusting the encryption code
1. Momentarily press the MENU key to advance to the next character.
2. To change the designated character, press the INC or DEC key.
3. To exit this page, press and hold the MENU key for 1 second.
Hide Transmitter Name Menu
This setting will hide the name menu. A hidden name menu allows for quicker navigation and prevents
accidental changes.
•
HIDDEN - The name menu doesn’t appear when cycling through the menu settings.
•
DISPLAYED - The name menu will appear.
Transmitter Name Set
The transmitter name menu allows the transmitter to be named to be changed from the default name - which
is the unit’s serial number. The name entered becomes part of the name of the recorded audio files, and is also
included in the metadata of the BWF file. Naming the unit aids in identifying the files from several different
recorders.
The maximum name length is 8 characters. Any letter or number can be used. If desired a space can
even be used.
To set/change the transmitter name:
1. Press the INC or DEC key to change the character in the current position above the arrow.
2. Press the MENU key to proceed to the next character.
3. When finished, press and hold the MENU key to set the name.
ID1: 000 ID2: 000
NAME MENU:
DISPLAYED
NAME: 1234