Zaxcom ZMT-421, Руководство пользователя

Страница: 23 / 31

Zaxcom ZMT4 Flex Wiring Diagrams
23
Firmware
Each unit is shipped with the latest firmware version installed. As newer firmware becomes available it can be
downloaded from the Zaxcom website:
http://www.zaxcom.com/support/updates /
Newer version of beta firmware may be found on the Zaxcom Forums:
http://www.zaxcom.com/forum
It is recommended to keep a copy of the “SNXXXX.ME” file for each transmitter. The SNXXXX.ME file contains the
setup parameters of that specific transmitter - so in the event that there is a problem with the transmitter and the
settings get corrupt the SNXXXX.ME file can be used to recreate the setting for that transmitter. To copy and save
the SNXXXX.ME files simply format a card in each transmitter then copy and archive the SNXXXX.ME files to a
computer.
Updating the ZMT4 Flex firmware
1. Format a micro SD card in the transmitter.
2. Remove the card and with a computer delete the “SNXXXX.ME” file.
3. Download the ZMT4 Flex firmware “ZMT-XXX.bin” from the Zaxcom website and copy it onto the formatted
card.
4. Power down the ZMT4 Flex and insert the card into the transmitter.
5. Simultaneously hold down the INC and DEC keys while powering up the unit.
6. The screen will display “BURN ROM” with the version of firmware that is loading.
7. From power up to “DONE” will take about 30 seconds.
8. Upon completion, cycle the power and confirm that the transmitter is running the new firmware.
WARNING:
Before updating the firmware be sure to insert a fresh battery and do not power down the unit during
the update process, if the unit should lose power during the upgrade, it may need to be sent back to Zaxcom for
repair.
Updating ERX firmware with a ZMT4 Flex transmitter
1. From the ZaxNet menu set ZaxNet mode to transmit (TX).
2. Check that the ERX is set to the same ZaxNet frequency that the ZMT4 Flex is set to transmit on. Check that
the GROUP ID is set the same in both the ZMT4 Flex and ERX, and make sure encryption is shut off.
3. Format a micro SD card in ZMT4 Flex transmitter.
4. Remove the card, and with a computer delete the “SNXXXX.ME” file.
5. Download the ERX firmware “ERX-XXX.bin” from the Zaxcom website and copy it onto the formatted card.
6. Insert the card into the transmitter.
7. Proceed to the SETUP MENU and select PRESS UP TO SEND ERX PROG FILE
8. From the firmware update menu on the ERX press the INC key 5 times to see WAITING FOR PROGRAM.
9. Press the INC key on the transmitter to trigger the update process.
10. The ERX should indicate its progress after a few seconds.
11. When the ERX has been updated the screen will display “SUCCESS”.
WARNING: Before updating the firmware be sure to insert a fresh battery and do not power down the unit during
the update process, if the unit should lose power during the upgrade, it may need to be sent back to Zaxcom for
repair.