Chapter 2____________________________________Zaxcom Miniature Digital Recorder User’s Manual
12
Additional microphones will be added to this list after a review of their 3.3v power performance and RF
interference susceptibility has been completed.
Non-RF Resistant Lavs
Use one of the following microphone models:
Brand
Model
Voltage
Notes
Audio-Technica
892*CL4
3
Audio-Technica
898*L4
3
Audio-Technica
899*L4
3
Countryman
Isomax Instrument
M2H*W3
3
Hypercardioid
Countryman
Isomax Instrument
M2C*W3
1.5
Cardioid
DPA
Headband 4067
3
Other headband requires 5 volts
Table 2-2 Compatible Non-RF Resistant Lavalier Microphones
Additional microphones will be added to this list after a review of their 3.3v performance.
General
The ZFR100 has an unbalanced microphone input accessed through a 3-pin micro-LEMO connector. You can use
an unbalanced dynamic microphone or a powered lavaliere. It is recommended that you use 3-wire lavalieres with
separate pins for ground, audio and power.
When using a Line-level input, an inline pad is required on the standard dynamic microphone input cable (XLR-3 to
3-pin micro-LEMO).
When using a phantom powered microphone with the ZFR100, you must use an external 48 VDC power supply.
NOTE:
Once upon a time, the Denecke 48V power supply could damage the now discontinued Goldline
transmitter‟s preamp. This is NOT the case with the ZFR100.
