Chapter 2____________________________________Zaxcom Miniature Digital Recorder User’s Manual
18
Normal Startup Sequence (with a formatted card inserted)
(
EEEEEEEEEE
– Indicates the size of the card i.e. 2 GBYTES or
512 MBYTES)
(Optional screen – occurs if the recording was not correctly closed.)
(
F
– indicates how many previous recording(s) were found.)
(
GGGGGGG
– indicates which Record Format is set in the Extended
Menu.)
(The unit does not go into auto-record once it has completed its boot-up
sequence.)
Transport Control page
STOP 00:00:00:00
000:
Page purpose:
This is the default page at startup and displays the following information:
•
Recorder mode
•
Current timecode
•
Current recording segment
•
Current audio level
Recorder Modes (top line, left side):
STOP
– Recording is stopped (accompanied by 1 beep).
LREC
– Recording is started and Loop Record mode is enabled (accompanied by 2 beeps).
REC
– Recording is started and Non-Loop Record mode is enabled (accompanied by 2 beeps).
WAIT
– May appear just before going into record, or if the card is ejected while recording.
Timecode based on the current mode (top line, right side; hours : minutes : seconds : frames):
While in STOP mode
– displays the location where playback will start.
While in PLAY mode
– displays the current location as the segment plays back.
While in RECORD mode – displays the timecode coming from the generator.
Current recording segment (bottom line, left side):
Currently the maximum number of recording segments that can be on any one card is 254.
Current audio level at the pre-amp: measured in dBFS with zero on the far right side
The current playback timecode is displayed in the transport control page.
LCD
SYNTH AB
PCB REVB BBBB
VER A-AAA (CC)
FOUND SD CARD
EEEEEEEEEE
SIZELBA 1
SEG F _
FOUND F SEGS
MODE=GGGGGGG
ZAXCOM VA-AAA
ZFR100 SN:ZZZZZ
STOP 00:00:00:00
000:
