Zaxcom TRXFB3, Руководство пользователя

Страница: 26 / 36

Zaxcom TRXFB3 Firmware
26
Firmware
Each unit is shipped with the latest firmware version installed. As newer firmware becomes available it can be
downloaded from the Zaxcom website:
http://www.zaxcom.com/firmware-updates
Newer version of beta firmware may be found on the Zaxcom Forums:
http://www.zaxcom.com/forum
Each time a unit is powered up, the firmware version number is displayed briefly on the screen. Pressing the DEC
key during the boot up will slow down the screen to allow easier viewing of the information.
Updating the TRXFB3 firmware
1. Set the transmission modulation to mono.
2. Format a micro SD card in the transmitter.
3. Remove the card and with a computer delete the “SNXXXX.ME” file.
4. Download the TFB firmware “TFB-XXX.bin” from the Zaxcom website and copy it onto the formatted card.
5. Insert the card into the transmitter.
6. Simultaneously hold down the INC and DEC keys while powering up the unit.
7. The screen will display “BURN ROM” with the version of firmware that is loading.
8. From power up to “DONE” will take about 30 seconds.
9. Upon completion, cycle the power to run on the new version.
WARNING: Before updating the firmware be sure to insert a fresh set of batteries and do not power down the unit
during the update process, if the unit should lose power during the upgrade, it may need to be sent back to
Zaxcom for repair.