Zavio P8220 Скачать руководство пользователя страница 5

Страница: 5 / 46

1.2

Electromagnetic Compatibility (EMC)

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which

case the user may be required to take adequate measures.

Содержание P8220















































Результаты поиска

Содержание P8220

Отзывы:

Похожие инструкции для P8220

Бренды по названию

Популярные бренды

Zavio P8220, Руководство пользователя

Результаты поиска

Содержание P8220

Отзывы:

Похожие инструкции для P8220

Бренды по названию

Популярные бренды