Zavio F3102, Руководство пользователя

Страница: 25 / 31

24
Trigger
You may activate the following trigger types as you wish depends on various conditions:

Motion Detection : Click it on for using Motion Detection function as a sensor. You must configure
motion detection function before taking this as the trigger. Set minimum time interval between 2
triggers, and choose the desired detection area. The detection type individually stands for the
following meanings:
Start : The trigger would be activated when the target object starts to move.
Stop : The trigger would be activated when the target object stops to move.
Start-Stop : The trigger would be activated during the target object starts to move till it stops.

Audio Detection : Click it on for using Audio Detection function as a sensor. You must configure
audio detection function before taking this as the trigger. Set minimum time interval between 2
triggers. The detection type stands for the following meanings individually:
Start : The trigger would be activated when the sound being made.
Stop : The trigger would be activated when the sound being cut off.
Start-Stop : The trigger would be activated during the sound being made and cut off.

Tampering Detection : This setting is set for the trigger will be started for the duration of tampering lasts
you configure. The duration range is from 5 seconds to 900 seconds

Digital Input : This can be set to control the external alarm input of I/O port on the rear of the device to
start the trigger.

Periodical : This can be set the certain period(by minute) to start the trigger.

On boot : The event is triggered when the IP Camera has been started over .

IR Cut Filter : This can be set the IR Cut filter mode to start the trigger.

Capacity Warning : This is triggered when SD Card capacity is be below the value you set.

Network Link Down : The event is triggered when the network get disconnected.

IP Notification : The event is triggered when the network being restarted or the IP being changed. And
there are optional network types to select, such as DHCP
、
Static IP and PPPoE.

PIR : Click it on for using as a sensor. You must configure tigger alternative before taking this as the
trigger. Set minimum time interval between 2 triggers.
Start : The trigger would be activated when the sound being made.
Stop : The trigger would be activated when the sound being cut off.
Start-Stop : The trigger would be activated during the sound being made and cut off.