D5110/D5111/D7110 User Manual
39
Notify Type
: You can select the notify type among DHCP, Static IP, and PPPoE.
SMTP Server Name
:
Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
SMTP Server Port
: You can set port number from 1~65535 according to your mail
server. The default value is 25.
Security setting: Tick SSL box if the mail server you use has security restriction.
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
Authentication
: Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, there are
SMPT, POP before
SMPT or both
three options.
Authentication
:
Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, there are
SMPT, POP before
SMPT or both
three options.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP
: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
POP server name
:
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
