Zavio CB3210, Быстрое руководство по установке, Страница: 5 / 10

4
LED Indicator
LED Color Indication
Network
Green Solid green when network is established.
Orange Blink orange when there is network activity.
SD Card & Reset button
Reset: When the device is powered, press the Reset Button to reboot the device,
or hold the Reset Button for 15 seconds to the settings back to factory default.
Install the hardware and connect all cables
A. RJ45 waterproof connector
1. Make sure all components are assembled as shown on the below graph.
2. Check that the Ethernet Port and the Waterproof main body are tightly fasten.
B. Wall mounting and Ceiling mounting
1) Attached the alignment sticker to the wall. Drill four holes into the wall. Then
hammer the supplied plastic anchors into the screw holes and secure the
bracket with supplied screws.
2) Adjust the angle of the bracket to aim the desired area.