Zavio B7210, Быстрое руководство по установке

Страница: 5 / 16

4
LED Indicator
ō ōņŅġġ ńŰŭŰųġ ŊůťŪŤŢŵŪŰůġ
ŏŦŵŸŰųŬġ
ňųŦŦůġ ŔŵŦŢťźġŨųŦŦůġŧŰųġŏŦŵŸŰųŬġŭŪůŬįġ
ŐųŢůŨŦġ ŇŭŢŴũġŰųŢůŨŦġŸũŪŭŦġŏŦŵŸŰųŬġŢŤŵŪŷŪŵźġ
őŰŸŦųġ
œŦťġ ŔŵŦŢťźġųŦťġŧŰųġţŰŰŵŪůŨġŶűġűųŰŤŦŴŴġ
ŃŭŶŦġ ŔŵŦŢťźġţŭŶŦġŧŰųġţŰŰŵŪůŨġŶűġŤŰŮűŭŦŵŪŰůġ
ŖůŭŪŵġ ġ
ŸũŦůġųŦŴŦŵġţŶŵŵŰůġűųŦŴŴŦťġŧŰųġŢŵġŭŦŢŴŵġĶġŴŦŤįġ
ŵŰġŧŢŤŵŰųźġťŦŧŢŶŭŵġ
ŎŪŤųŰġŔŅġİġ
Ŕ
ŔŅʼnńġ
ŐųŢůŨŦġ
ŔŵŦŢťźġŰųŢůŨŦġŮŦŢůŴġŔŅġŤŢųťġųŦŢťźġ
ŇŭŢŴũŦŴġŰųŢůŨŦġŸũŪŭŦġŢŤŤŦŴŴŪůŨġŔŅġŤŢųťġ
Power Mode
PoE Mode
Power
Requirement
őŰņġĩŊņņņĹıijįĴŢŧĪġŸŪŵũġńŭŢŴŴġĴġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ŏŰŵŦĻġŘũŪŭŦġŊœġŰůĭġʼnŦŢŵŦųġŢůťġŇŢůġŸŪŭŭġţŦġťŪŴŢţŭŦťį
ġ ġ
Power
Consumption
ĴįĶĺŘĭġŸŪŵũŰŶŵġŊœİʼnŦŢŵŦųİŇŢůġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ĸįĺŘĭġŸŪŵũġŮŢŹįġŊœġŰůġ
Adaptor Mode
Power
Requirement
IJijŗİIJįĶłġłťŢűŵŰųġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ŏŰŵŦĻġŘũŪŭŦġŊœġŰůĭġʼnŦŢŵŦųġŰųġŇŢůġŸŰŶŭťġţŦġŢŤŵŪŷŢŵŦťġŢŶŵŰŮŢŵŪŤŢŭŭźįġ
ġ
Power
Consumption
ĴįĶĹŘĭġŸŪŵũŰŶŵġŊœİʼnŦŢŵŦųİŇŢůġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ĸįĺŘĭġŸŪŵũġŮŢŹįġŊœġŰůġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ĺįķŘĭġŸŪŵũġŮŢŹįġŊœġŰůġİġʼnŦŢŵŦųġŰůġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
ĹįĹĸŘĭġŸŪŵũġŮŢŹįġŊœġŰůġİġʼnŦŢŵŦųġŇŢůġ
Note: Heater will be activated while the inner temparature drops under 5
ɗ
and fan over 50
ɗ
.
Install the hardware and connect all cables
a. Hardware Installing
1) Assembling sun shield and camera with two supplied screws(M3*6).
2) Fix U-shape bracket to the bottom of camera with supplied screws.
3) Insert all cables (RJ45/power cord/DIDO) into waterproof connector (M25*1.5).
4) Open the front cover and feed all cables through the screw hole of bottom cover from outside. Connect
them to sockets. Then secure the connector tightly.
5) Attach the foam tape and silica gel. (Please change a new silica gel if open the top cover afterwards.)
6) Lock the front cover. Then secure the burglarproof screw.
7) Feed all cables through the front opening of wall mount bracket.
8) Push the spring mortise of wall mount bracket. Then hook the U-shape bracket onto the groove of the
former.
9) Secure the two screws of wall mount bracket on the other side.