Zavio B5010, Быстрое руководство по установке

Страница: 4 / 12

3
Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
1. Use the 2 supplied screws to fix the base plate to a flat surface.
2. Loosen the screws on the bracket to aim the shooting area.
3. Tighten the screws at the two joints of the bracket.
Warning before installation
Note 1: IP Camera watertihgt ambit
B5010/ B5111/ B5210 use IP-67 rated weatherproof housing.
The image as below shows you the ambit of watertight and
non-watertight, please make sure the cable with plug on the
right side of cable molding should be avoided from water.
Note 2: Sun shield install notificaton of B5210
For model B5210, due to it’s wilder view angle, the IR illumination
may or may not have interference by the positions of sun shield. To
ensure it’s optimal image, please have the sun shield be screwed to
the position indicated on the right hand side.
Note 3: How to use moisture absorber
(1)
Loosen the front glass cover of the housing.
(2) Loosen the two screws on both side of light board. Please be careful not to touch the LEDs
which are much closed to the screws.
(3) Put the moisture absorber on the top of the indicated positon.
(4) Secure back the two screws on both side of light board and the front glass cover.
(Please change a new moisture absorber if open the top cover afterwards.)