Zavig B8210, Руководство пользователя, Страница: 36 / 58

36
your FTP server.
Server Port- Leave at 21, unless your FTP server uses a different port.
Upload path-upload path
User Name and password- Provide valid login credentials for the FTP server.
Re-type Password-type password again
Passive Mode- Select “On” if your FTP server utilizes passive FTP, which is the most
common method.
Test- Press on Test button to make sure the FTP server information is all correct.
Add a SMTP Server
Server Setting:
Server Type- Select “SMTP.”
Mail Server- Type in the address of your mail server.
Server Port- Adjust the server
port if necessary. Port 25 is
standard, but your server may
be using different values (not so
uncommon these days as an
anti-spam measure).
Authentication- If your mail
server requires authentication
in order to send email, and most servers do these days, set authentication to “On” and
define the type of authentication below.
User Name and password- Provide valid login credentials for the email server.
Send mail from- The camera will use this address as its own email address. This email
address does not necessarily need to be a valid address.
Send test email to- Enter the email address to which you want the camera to send the
images and click on Test. If the test succeeds you can provide the information for the
media settings and click “Save”. The
actual target email address is defined
when you set up an event in the next
section.
Add a HTTP Server:
A HTTP server can be used by the camera to
trigger a script on a remote server if an
event occurs. User name, password and
proxy fields are all optional.