24
HTTPS
HTTPS
is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to the
http:// scheme normally used for accessing resources using HTTP. Using an https: //URL/ with a different
default TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP.
You can use the IP camera through HTTPS easily by using https:// instead of http://.
Create & Install
:
Create a self-signed certificate for HTTPS to recognize.
Installed Certificate
:
Display or remove the properties of the installed certificate.
HTTPS Connection Policy
:
Set HTTPS connection policy for different level of users.
To use the HTTPS encryption, please set up “
Create self-signed certificate
” for the first time you
use the HTTPS function, and then set up the connection policy for different users.
Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username
and password and do not protect video. When enable HTTPS with RTSP off mode, the IP Camera will
protect all setting including video.
Network Basic
Please refer to
p.10~12
Network Advanced
RTSP
General
RTP Port Range
: The default value of port range is 5000 ~ 7999 and can be changed from 1124 to 65534.
RTSP Port
: The default value is 554. If the IP Cameras connected with router and installed outside are over
2 sets and all of them need support RTSP, please fill the value in the blank space in the range from 1124 to
65534.
RTSP Configuration
Configure the RTSP by profile, then enable or disable the authentication.
Multicast
Status
: This can be enabled or disabled the multicast.
Access Name
: This will be shown and changed along with the profile you select.
Multicast Address
: Specify the multicast server address.
