Zato CAYMAN FCE II Series, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 80 / 96

80 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3.7
rotating the guide blades
Rotating the guide blades requires:
- a dowel pin�
Each guide blade is equipped with 4 cutting profiles (fig. 36 on page 80) :
∂ r0 ;
∂ r1 ;
∂ r2 ;
∂ r3 �
R0
R1
R2
R3
fig. 36 Guide blade cutting profiles
The guide blades can be rotated 3 times and require:
∂ the first time (fig. 37 on page 80) , rotating each blade in its housing by 180° (going from cutting
profile R0 to R1);
180°
fig. 37 Rotating the guide blade